41 College Hill, Freemans Bay, Auckland | 0800 668 662 | sales@motomail.co.nz

Motomail


Arai RX-7V Helmet - Graphics - Helmets-Road : Motomail - New Zealands Motorcycle Gear Superstore - ARAI ARAIArai RX-7V Helmet - Graphics - Helmets-Road : Motomail - New Zealands Motorcycle Gear Superstore - ARAI ARAI

Search: Go

Free delivery on all orders over $99

Arai RX-7V Helmet - Graphics
Roll over to zoom in or click to enlarge

Arai RX-7V Helmet - Graphics

Code:ARHERX7VEVO
Product Details

Arai RX-7V EVO Helmet - Graphics

The new RX-7V EVO, packed with seven decades of experience. The RX-7V EVO is the new flagship model with proven Arai protection combined with the ECE R22-06 approval. It’s not just a new model, it’s a new benchmark.

ECE R22-06 requires a much more stringent testing process than the previous ECE R22-05. Arai presented the RX-7V EVO and it gained homologation while maintaining its characteristic round, smooth and strong shell design to ‘glance-off’ and spread impact forces.

PB SNC2 Shell

Peripherally Belted Structural Net Composite. Arai’s proprietary (super fibre belt) peripheral belt, borrowed from F1 technology, maximizes shell strength and flexibility while maintaining low weight. Positioned across the top of the eye port, this band allows the use of a thinner EPS liner which greatly enhances the upward field of view – especially appreciated in a full racing tuck! The Structural Net Composite adds a physical bond to the resin bond of the many layers of fibres and reinforcing materials within the shell.

Ventilation

The combined systems offer excellent and efficient ventilation. The top duct provides 11% more airflow, with bigger switches for effortless operating. The lowered side-air channels guide air from the cheek pad area to the side ducts. The diffuser is 20 mm longer with improved aerodynamics, and 19% larger intake scoops, both work together with the Air Wing to improve stability. The chin cover blocks air intrusion and draws more air from the mouth area.

Antimicrobial Liner

Helps maintain neutral acidity levels close to human skin and antibacterial consumption. With the aim of a softer, deeper and even more comfortable fit Arai developed a softer liner frame material. The liner also has adjustable temple padding that allows for a customized fit.

General

  • Outer shell PB-SNC2
  • Variable Axis System (VAS)

Ventilation

  • Free Flow System (FFS)
  • Lowered side-air channel

Front ventilation

  • Center top vent - intake
  • Diffuser system
  • Brow vents extended to temple area**
  • Three position chin vent

Rear ventilation

  • Neck exhaust vent
  • Side exhausts

Aerodynamics

  • Pull Down Chin Spoiler
  • Patented Air Wing® adjustable**

Visor

  • VAS Max Vision Visor with De-Mist option
  • New Shield Latch Lever
  • Pinlock insert lens included

Interior

  • Antimicrobial Liner material
  • Replaceable Cheek Pads
  • Replaceable Interior
  • Replaceable Chinstrap covers
  • Replaceable Neckroll
  • Speaker pockets
  • Facial Contour System (FCS)
  • 5mm ’’Peel Away’’ Cheek pads
  • 5mm ’’Peel Away’’ Temple pad
  • Thin centre pad for more room in front area

Comfort

  • Emergency Release System (ERS)
  • Breath guard
  • Chin Curtain

Approval

  • ECE R22-06
Price: $1,495.50
or 6 interest free payments of with Laybuy
Availability:
Please make a selection below to view availability
Colour:
Size:
Fitting Guide

1. Measurement

Measuring the head is a starting point for the entire sizing procedure. The circumference of the head should be measured at a point approximately two centimetres above the eyebrows in front and at a point in the back of the head that results in the largest possible measurement. Take several measurements to make sure you have the largest one.

2. Try On

Once you have determined your preliminary tape measurement, select the helmet that is closest to the tape measurement and try on the helmet. If it is between sizes, round up to the next largest one.

The correct procedure to put on the helmet:

  1. Grasp the helmet by the chin straps, with the front of the helmet towards you and the top of the helmet facing down.
  2. Place the thumbs on the inside surface of the straps and balance the helmet with the index fingers.
  3. Spread the helmet apart with the hands, and slip down over the head.

If the helmet slides down on the head with no resistance, you have your first indication that it may be too large. If it will not slide down over the head at all it is too small. Many people unfamiliar with helmets are reluctant to pull down if they meet resistance as the helmet goes on, however if it is just snug going on, we recommend to get the helmet on. Only if the helmet is impossible to put on should you move up to the next size, as helmets that go on snug generally fit very well once all the way on. It is a fact that most people will select a helmet that is too large for them.

3. Horizontal and Vertical Movement Check

Once you are wearing the helmet, you should look carefully at the way it fits. Check to see if the cheek pads are in contact with the cheeks. Is there excess pressure on the cheeks? Look for gaps between the temples and the brow pad. Check the back of the helmet where the neck roll (if the helmet has one) makes contact with the neck. Does it touch at all? Or is it pushing the helmet away at the rear causing it to roll down over the eyes in front. After you have made your visual check, grab the helmet in your hands - one on either side - and while holding your head steady try to rotate the helmet from side to side. Note any movement of the skin while doing this, as well as the amount of resistance to movement. Next, check movement up and down, again noting skin movement and resistance. If in either test there was little or no skin movement, and/or the helmet moved very easily, the helmet is too large. A properly fitted helmet will cause the skin to move as the helmet moves. And, it will feel to the wearer as if evenly distributed pressure is being continuously exerted around the head.

NOTE: Helmets are a little like shoes, in that they do break-in a little. For this reason the best attitude to have when fitting is that the helmet should be as snug as you can stand to wear it.

4. Retention Check

This test may be a little uncomfortable, but it is very important to check. Fasten the chin strap tightly, hold your head steady, and grab the rear bottom edge with your fingers. Then try to roll the helmet off your head. If it comes off, it is undoubtedly too large. WARNING: Do not buy a helmet that can be rolled off the head with the strap fastened.

5. Pressure Point Check

Finally, unfasten the chin strap and remove the helmet. Immediately after the helmet has been removed, observe coloration of the skin of the forehead and cheeks. A reddening of the skin in a small area may indicate a pressure point. Pressure points sometimes are not noticed by the wearer for several minutes, or even hours later. They sometimes cause headaches, and are at the least, uncomfortable. If you notice a pressure point, but cannot remember experiencing discomfort there while wearing the helmet, put the helmet back on for a few minutes, paying particular attention to the anticipated pressure point. If you experience pressure point discomfort either time, go to the next larger size, repeating steps four and five.

Stock Availability
Motomail Head OfficeAvailable
SupplierContact us for availability
Suggestion
Most Viewed Items
Recently Viewed Items