REV'IT! Vertex Pro Suit
The sharp Lorica® lines give the Vertex Pro One-Piece a one of a kind appearance. MotoGP-developed dual comp protectors and CE-rated armor, including SEESMART™ hip protection, make this your ultimate high-performance suit.
- Safety seams
The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why REV'IT! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn.
- Betac® CE Protection
The Betac® protection in our suits is the same as our heroes use in professional racing series such as MotoGP. They are CE rated for the highest level of protection. The use of Velcro makes sure they are fixed to the outer shell, preventing them from moving or turning in case of an impact.
- Adjustable Betac® CE protection at shoulder
This MotoGP spec protector is adjustable on the shoulder, making it possible to customize the fit of the protector to the position on the bike. Thanks to the strong Velcro it will stay in place once positioned.
- Adjustable Betac® CE protection at knees
This MotoGP spec protector is fully adjustable for the leg thanks to its extremely strong Velcro, in order to customize the position for each rider. This results in the best personal fit and riding comfort.
- SEESMART™ CE-level 1 type B hip protector insert - version RV30
prepared for Divided Chest Protector SEESOFT™ CE-level 1 The protector pocket in this REV'IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT™ CE-level 1 - an easy upgrade to maximize safety.
- Dual-comp knee slider type A Dual-comp knee sliders type A are con
structed from a high-performance TPU compound, combined with an extra durable PA6 compound. Specially designed for racers who want high-performance sliders, these higher-quality compounds offer good feedback, giving you maximum durability without compromising your feel on the road. The sliders come in a pair of two, each anatomically shaped to fit either the left or the right knee, and high-quality Velcro attaches the sliders to leathers, ensuring they stay where they need to. Type A sliders are available in three colours, to fit every colour combination of your leathers, and the dual-injected colours keep the design visible even when the sliders begin to wear.
- Dual-comp protector
TPU aluminium protector at shoulders, elbows, and knuckles. The dual-comp protector consists of a 3D, pre-shaped honeycomb structure of TPU material, topped by an aluminium high-impact shield, for ultimate sliding. This lightweight hard part increases the level of protection significantly, without adding the considerable weight of traditional plastic hard parts. When fighting G-forces, every gram counts! Under the shoulder and elbow parts is ergonomically shaped, CE-approved armour, perfectly placed to maximize impact-resistance while preserving freedom of movement.
- Prepared for SEESOFT™ CE-level 2 back protector insert - Type RV
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT™ CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
- 3D air mesh
This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D air mesh is a must-have for long touring riders.
Lorica® is constructed from microfibres that give the material characteristics similar to those of natural leather, including a leather look. This low-maintenance material is not as strong as leather, but softer and lighter, with a consistent thickness that makes it easier to process.
- Monaco Performance cowhide
This top-grain leather not only has had its surfaces sanded to correct imperfections, it has been reinforced to up its performance factor for riding on the track or street. Long-lasting and extremely protective.
- Nubuck leather
Nubuck is top-grain cattle rawhide leather that has been sanded or buffed on the grain side (outside) to give a velvet-like surface. Nubuck is similar to suede, but with a finer texture which is more durable.
- PWR|Kevlar stretch
This PWR|shell stretch material has aramide and nylon fibres for extra strength.
- Aero cool 3D mesh
This open-loft three-dimensional mesh helps facilitate optimal ventilation while riding. It features integrated lines to wick moisture away from the body, keeping riders cool and comfortable under even extreme circumstances.
- Removable lining
A removable, washable mesh lining with stretch inserts for more comfort.
- stretch panels
The stretch panels in this garment aid in flexibility. They contribute to the riders comfort as they provide great freedom of movement.
- Calf zippers
- Comfort cuffs
- Stretch lips
- VCS|speed hump hydra bag prepared
REV’IT! has taken its ventilated speed hump and improved it even further, with a new design that allows riders to put a hydra bag inside it. The REV’IT! ventilated speed hump has an air inlet at the top of the hump, and the perforated foam inside this leather speed hump is designed to let air flow through the garment, spreading over the rider’s back for comfortable ventilation. Extra cooling of the area is especially beneficial now that riders are wearing back protectors more and more – and now, with a hydra bag inside, riders can keep hydrated during races and rides.
- partly perforated outer shell